ENGINE
INSTRUMENTATION:
Incorporated in the control panel or mounted
on a separate engine mounted panel, our option, shall be the following engine
instrumentation:-
1- Oil
Pressure gauge.
1- Water
Temperature gauge.
1- Hours
run recorder.
BONNET
& SOUND PROOF CANOPY:
Should be fabricated by heavy duty steel
structure covering with steel sheet. The inner side of the steel enclosure
should be lined with sound absorbing materials which should be covered by
perforated steel sheet. The sound reducing level should be 82 dBA @ 1 meter
from the canopy.
GENERATING
SET PROTECTION:
The unit shall be arranged to automatically
shutdown and indicate the same in the event of:
Fail to start
Low oil pressure
High engine temperature
Engine over speed
Overload
Over/under voltage protection
FINISH:
The generating set would be finished in
Hammer blue/Yellow and the control panel in grey/Yellow.
HAND
BOOKS:
ii. Engine & alternator parts catalogue.
TOOLS:
One set of standard routine maintenance tools
would be supplied in a tool box.
AUTO
CHANGE OVER SWITCH:
At the event of mains failure, an energy stop
switch should be attached with the Alternator body, the generator shall start
or if supply voltage goes below specific level or single phasing automatically
and change over to the load. With restoration of main supply the generator
shall shunt down automatically as well as the load shall be transferred to the
normal supply. The bidder must mention the change over time in seconds.
The supply and installation of generators
with automatic change over switch shall be on “turnkey basis” and shall include
the cost of:
a) Taking
necessary permission from the relevant of authority.
b) All
pipe works.
c) all
inter connecting power and control cable works.
d) Daily
and reserve fuel tank including the transfer pump.
Source PWD Schedule Book2014
No comments:
Post a Comment